Vesicant & irritant chemotherapy

Adapted from the Beth Israel Deaconess Medical Center: Administration and Extravasation Management of Vesicant Chemotherapy Agents, revised 11/2010. Authors: Holly Dowling, RN, BSN, OCN; unit based educator Ambulatory Hematology/Oncology; Zaven Norigian, Pharm.D., BCOP; Clinical Pharmacy Coordinator - Oncology; Meggie Galligan, RN, BSN; unit based educator Inpatient Hematology/BMT; Erin Tardanico, RN, BSN; OCN, unit based educator Inpatient Oncology

Vesicant chemotherapy

• Cisplatin (Platinol) [in concentrations >=0.5 mg/mL)
• DACTINomycin (Actinomycin-D, Cosmegen)
• DAUNOrubcin (daunomycin, Cerubidine)
• DOXOrubicin (Adriamycin)
• Epirubicin (Ellence)
• IDArubicin (Idamycin)
• Mechlorethamine (Mustargen)
• Mitomycin C (Mutamycin)
• Oxaliplatin (Eloxatin)
• VinBLAStine (Velban)
• VinCRIStine (Oncovin)
• Vinorelbine (Navelbine)

Vascular irritant chemotherapy

• Arsenic Trioxide (Trisenox)
• Bleomycin (Blenoxane)
• Bortezomib (Velcade)
• Busulfan (Busulfex)
• CARBOplatin (Paraplatin)
• Carmustine (BiCNU)
• CISplatin (Platinol) [concentration <0.5mg/mL)
• Cladribine (Leustatin)
• Dacarbazine (DTIC-Dome)
• DOCEtaxel (Taxotere)
• Etoposide (VePsid)
• Etoposide Phosphate (Etopophos)
• Fluorouracil
• Gemcitabine (Gemzar)
• Ifosfamide (Ifex)
• Irinotecan (Camptosar)
• Liposomal Cytarabine (DepoCYT)
• Liposomal DAUNOrubicin (Daunoome)
• Liposomal DOXOrubicin (Doxil)
• Liposomal VinCRIStine (Marqibo)
• Melphalan (Alkeran)
• Mitoxantrone (Novantrone)
• PACLItaxel (Taxol)
• PACLItaxel, nanoparticle albumin-bound (Abraxane)
• Plicamycin (Mithracin)
• Teniposide (Vumon)
• Thiotepa
• Topotecan (Hycamtin)

item 1	item 2
row2a	row 2b

Melphalan Irritant Cold None None Mitomycin C Vesicant Cold Sodium Thiosulfate Mix 4 mL of 10% sodium thiosulfate with 6 mL sterile water (yields 10mL of 1/6 molar sodium thiosulfate). Inject 5 mL subcutaneously using a 25 gauge needle, changing needles between each injection, into afftected area in a pinwheel fashion. Mitoxantrone Irritant Cold - Apply cold packs for 15-20 minutes 4 times per day for 1-2 days. None None Oxaliplatin Vesicant Heat - Apply warm compresses to extravasation site for 1 hour. Caution- excessive heat can cause tissue damage. Sodium Thiosulfate Mix 4 mL of 10% sodium thiosulfate with 6 mL sterile water (yields 10mL of 1/6 molar sodium thiosulfate). Inject 5 mL subcutaneously using a 25 gauge needle, changing needles between each injection, into afftected area in a pinwheel fashion. PACLItaxel Irritant Cold - Apply ice to the area for 15-20 minutes each hour for 4 hours. Caution- excessive cold can cause tissue damage. Hyaluronidase Inject a total of 1 mL (200 units) divided into 5-10 subcutaneous injections of 0.1-0.2 mL in a pinwheel fashion using a 25 guage needle, changing needles between each injection, into affected area up to 250 units or until symptoms resolve. PACLItaxel, nanoparticle albumin-bound Irritant Cold None None Plicamycin Irritant Cold None None Teniposide Irritant Cold Hyaluronidase Inject a total of 1 mL (200 units) divided into 5-10 subcutaneous injections of 0.1-0.2 mL in a pinwheel fashion using a 25 guage needle, changing needles between each injection, into affected area up to 250 units or until symptoms resolve. Thiotepa Irritant Cold None None Topotecan Irritant Cold None None VinBLAStine Vesicant Heat Hyaluronidase Inject a total of 1 mL (200 units) divided into 5-10 subcutaneous injections of 0.1-0.2 mL in a pinwheel fashion using a 25 guage needle, changing needles between each injection, into affected area up to 250 units or until symptoms resolve. VinCRIStine Vesicant Heat Hyaluronidase Inject a total of 1 mL (200 units) divided into 5-10 subcutaneous injections of 0.1-0.2 mL in a pinwheel fashion using a 25 guage needle, changing needles between each injection, into affected area up to 250 units or until symptoms resolve. Vinorelbine Vesicant Heat Hyaluronidase Inject a total of 1 mL (200 units) divided into 5-10 subcutaneous injections of 0.1-0.2 mL in a pinwheel fashion using a 25 guage needle, changing needles between each injection, into affected area up to 250 units or until symptoms resolve.|}

• CISplatin is a vascular irritant when in concentrations of <0.5mg/mL
  • DMSO = Dimethylsulfoxide

Definitions

• Extravasation: The inadvertent leakage of a solution into surrounding tissue.
• Flare reaction: A skin reaction which occurs in response to an allergen.
• Vesicants: Solution that may cause severe and lasting tissue injury and necrosis.
• Vascular irritants: Drugs that can cause an inflammatory reaction, aching, swelling, pain or phlebitis at the injection site or along the vein.

Drug	Vesicant or Irritant	Apply Heat or Cold	Known Antidote	Treatment
Arsenic Trioxide	Irritant	Cold	None	None
Bleomycin	Irritant	Cold	None	None
Bortezomib	Irritant	Cold	None	None
Busulfan	Irritant	Cold	None	None
Carboplatin	Irritant	Cold – every 8 hours for 3 days	Sodium Thiosulfate	Mix 4 mL of 10% sodium thiosulfate with 6 mL sterile water (yields 10 mL of 1/6 molar sodium thiosulfate). Inject 5 mL subcutaneously using a 25 gauge needle, changing needles between each injection, into affected area in a pinwheel fashion.
			OR DMSO (Dimethylsulfoxide) 99%	4 drops per 10 square centimeters of skin surface applied topically over area twice the size affected every 8 hours for 7 days. Allow to air dry.
Carmustine	Irritant	Cold	Manage conservatively	Manage conservatively as first line option with supportive non-pharmacologic care measures. Hyaluronidase maybe used in extreme cases such as large volume extravasation, severe irritation, etc.
			Hyaluronidase	Inject a total of 1 mL (200 units) divided into 5-10 subcutaneous injections of 0.1-0.2 mL in a pinwheel fashion using a 25 gauge needle, changing needles between each injection, into affected area up to 250 units or until symptoms resolve.
Cisplatin	Irritant (in concentrations of <0.5 mg/mL)	Cold – 60 minutes every 8 hours for 3 days	Sodium Thiosulfate	Mix 4 mL of 10% sodium thiosulfate with 6 mL sterile water (yields 10 mL of 1/6 molar sodium thiosulfate). Inject 5 mL subcutaneously using a 25 gauge needle, changing needles between each injection, into afftected area in a pinwheel fashion.
			OR DMSO (Dimethylsulfoxide) 99%	4 drops per 10 square centimeters of skin surface applied topically over area twice the size affected every 8 hours for 7 days. Allow to air dry.
Cladribine	Irritant	Cold	None	None
Dacarbazine	Irritant	Cold	Manage Conservatively	Manage conservatively with attention to protect exposed tissues from light following drug administration
			OR Sodium Thiosulfate	Mix 4 mL of 10% sodium thiosulfate with 6 mL sterile water (yields 10 mL of 1/6 molar sodium thiosulfate). Inject 5 mL subcutaneously using a 25 gauge needle, changing needles between each injection, into afftected area in a pinwheel fashion. NOTE: Sodium thiosulfate is recommended only when concentrated dacarbazine is extravasated. There are no clinical reports of the use of sodium thiosulfate following dacarbazine extravasation. Its use for dacarbazine extravasation is based on evidence that it has worked as an antidote for dacarbazine-induced skin toxicity.
Dactinomycin	Vesicant	Cold	None	None
Daunorubicin	Vesicant	Cold	Dexrazoxane	Dexrazoxane once daily for 3 consecutive days. The first infusion should be initiated as soon as possible and within the first six hours after extravasation. Recommended dose: (Maximum daily dose) Day one: 1000 mg/m² (2000 mg) Day two: 1000 mg/m² (2000 mg) Day three: 500 mg/m² (1000 mg) If cooling techniques are being used, withhold cooling 15 minutes before and after the infusion. Infuse in an extremity or area other than the one affected by the extravasation. Reduce dose by 50% for patients with creatinine clearance <40 mL/min.
Docetaxel	Irritant	Cold	Hyaluronidase	Inject a total of 1 mL (200 units) divided into 5-10 subcutaneous injections of 0.1-0.2 mL in a pinwheel fashion using a 25 gauge needle, changing needles between each injection, into affected area up to 250 units or until symptoms resolve.
Doxorubicin	Vesicant	Cold - Apply intermittently for 15 minutes, 4 times daily for 3 days	Dexrazoxane	Dexrazoxane once daily for 3 consecutive days. The first infusion should be initiated as soon as possible and within the first six hours after extravasation. Recommended dose: (Maximum daily dose) Day one: 1000 mg/m² (2000 mg) Day two: 1000 mg/m² (2000 mg) Day three: 500 mg/m² (1000 mg) If cooling techniques are being used, withhold cooling 15 minutes before and after the infusion. Infuse in an extremity or area other than the one affected by the extravasation. Reduce dose by 50% for patients with creatinine clearance <40 mL/min.
Epirubicin	Vesicant	Cold	Dexrazoxane	Dexrazoxane once daily for 3 consecutive days. The first infusion should be initiated as soon as possible and within the first six hours after extravasation. Recommended dose: (Maximum daily dose) Day one: 1000 mg/m² (2000 mg) Day two: 1000 mg/m² (2000 mg) Day three: 500 mg/m² (1000 mg) If cooling techniques are being used, withhold cooling 15 minutes before and after the infusion. Infuse in an extremity or area other than the one affected by the extravasation. Reduce dose by 50% for patients with creatinine clearance <40 mL/min.
Etoposide	Irritant	Heat - Apply warm compresses for 30 to 60 minutes, then alternate off/on every 15 minutes for 1 day	Hyaluronidase	Inject a total of 1 mL (200 units) divided into 5-10 subcutaneous injections of 0.1-0.2 mL in a pinwheel fashion using a 25 gauge needle, changing needles between each injection, into affected area up to 250 units or until symptoms resolve.
Fluorouracil	Irritant	Cold	None	None
Idarubicin	Vesicant	Cold	Dexrazoxane	Dexrazoxane once daily for 3 consecutive days. The first infusion should be initiated as soon as possible and within the first six hours after extravasation. Recommended dose: (Maximum daily dose) Day one: 1000 mg/m² (2000 mg) Day two: 1000 mg/m² (2000 mg) Day three: 500 mg/m² (1000 mg) If cooling techniques are being used, withhold cooling 15 minutes before and after the infusion. Infuse in an extremity or area other than the one affected by the extravasation. Reduce dose by 50% for patients with creatinine clearance <40 mL/min.
Ifosfamide	Irritant	Cold - 60 minutes every 8 hours for 3 days.	DMSO (Dimethylsulfoxide) 99%	4 drops per 10 square centimeters of skin surface applied topically over area twice the size affected every 8 hours for 7 days. Allow to air dry.
Irinotecan	Irritant	Cold	None	None
Liposomal cytarabine	Irritant	Cold	None	None
Liposomal daunorubicin	Irritant	Cold	None	None
Liposomal doxorubicin	Irritant	Cold	None	None
Liposomal vincristine	Irritant	Cold	None	None
Mechlorethamine	Vesicant	Cold	Sodium Thiosulfate	Mix 4 mL of 10% sodium thiosulfate with 6 mL sterile water (yields 10mL of 1/6 molar sodium thiosulfate). Inject 5 mL subcutaneously using a 25 gauge needle, changing needles between each injection, into affected area in a pinwheel fashion.